Home > Laboratory > Analytical Measurement and Testing > Oxygen Measurement > Device > Oxygen meter inoLab® Oxi 7310 Set 4

Oxygen meter inoLab® Oxi 7310 Set 4

Reliable Documentation for dissolved oxygen measurement: This is the inoLab® Oxi 7310 or inoLab® Oxi 7310P. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab® Oxi 7310 supports the long proven WTW galvanic sensors, CellOx® 325 and StirrOx® G. A calibration history of the 10 last calibrations allows conclusions on the state of the sensor. Calibrations versus external standards e.g. Winkler titration, are possible, too. The meter includes automatic barometric pressure and temperature compensation.
Scope of supply: Device, oxygen sensor StirrOx® G, electrolyte, abrasive foil, replacement membrane caps, universal power supply, stand, operating instructions, CD-ROM with software, USB cable

Specifications
Ranges:	All values+/-1 digit
Dissolved oxygen concentration:	0,00 ... 20,00 mg/l +/- 0,5 % of measured value 0 ... 90 mg/L +/- 0,5 %
Saturation:	0,0 ... 200,0 % +/- 0,5 % of measured value 0 ... 600 % +/- 0,5 % of measured value
Partial pressure:	0 ... 200,0 hPa, 0 …1250 hPa
Temperature:	-5,0 ... 105,0 °C +/- 0,1 °C
Calibration:	1-point air calibration (water vapour saturated air) or versus external standard
Calibration memory:	Up to 10 calibrations recallable
Display:	Backlit graphic LCD
Memory: Logger:	Manual 5/5000 automatic Manual/time controlled
Interface:	Mini USB-B
Power supply:	Universal power supply, 100 to 240 V, 50/60 Hz, 4 x 1,5 V AA