08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Analytical Systems for Environmental and Food Analysis
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Accessories Data and electronics for Photometer PrimeLab 2.0
- Accessories for Lovibond® photometers
- Accessories for photometer photoFlex® series and turbidimeters Turb® 430 series
- Accessories for Photometer PrimeLab 2.0
- Accessories for Photometers PrimeLab 1.0
- Accessories NANOCOLOR®
- Accessories NANOCOLOR®, Membrane Filtration
- Accessories NANOCOLOR®, Standard Rectangular Cuvettes
- Cells for Photometer photoLab®
- Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
- Conductivity cell probes for purified and ultra-pure water, starter kit, for PrimeLab 2.0
- Conductivity cell probes, for PrimeLab 2.0
- Conductivity cell probes, starter kit, for PrimeLab 2.0
- Cuvettes for Photometer PrimeLab 2.0
- Cuvettes for photometers
- Digestion Reagents for Photometer photoLab® and pHotoFlex®
- Disposable syringes for Photometer PrimeLab 2.0
- Handheld photometers pHotoFlex® series, with / without pH and turbidity measurement
- LLG Photometers PrimeLab 1.0
- ORP electrodes for PrimeLab 2.0
- ORP electrodes, starter kit, for PrimeLab 2.0
- pH electrodes for PrimeLab 2.0
- pH electrodes for PrimeLab 2.0, refillable
- pH electrodes, starter kit, for PrimeLab 2.0
- pH electrodes, starter kit, for PrimeLab 2.0, refillable
- Photometer MD50
- Photometer MD50 Hazen
- Photometer MD50 Suspended solids
- Photometer NANOCOLOR® VIS II / NANOCOLOR® UV/VIS II
- Photometer photoLab® and photoFlex®, stored test programs
- Photometer photoLab® and photoFlex®, stored test protocols
- Photometer PrimeLab 2.0 SOLO
- Photometer PrimeLab 2.0 starter-kit
- Photometer PrimeLab 2.0 starter-kit, all parameters activated
- Photometer PrimeLab 2.0 starter-kit, all parameters activated, except turbidity (NTU)/PTSA/fluorescein
- Photometer PrimeLab 2.0 starter-kit, with turbidity (NTU)
- Photometer system MD 600 / MD 610
- Photometer system MultiDirect
- Photometers MD 100
- Photometers MD 100 Boiler Water/Cooling Water
- Portable UV254 Analyser
- Reagent powder for Comparators and Photometers Lovibond®
- Reagent sets drops
- Reagent sets powder
- Reagent sets tablets
- Reagent solutions for photometers Lovibond®
- Reagent tablets for Photometer Lovibond®
- Reagent Tablets for Photometers and Comparators Lovibond®
- Reagents for Photometer MD 100 Boiler Water/Cooling Water
- Reagents VARIO for Photometer Lovibond®and HACH®
- Reagents VISOCOLOR Powder Pillows Phosphate
- Reference Standard Kit
- Reference standard kit pH for photometers MD series
- Reference standard kits Chloride for photometers MD series
- Reference standards for Photometer PrimeLab 2.0
- Tube tests NANOCOLOR® Copper
- Tube tests NANOCOLOR® Tin
- UV Spectral Sensor
- UV254 Absorption Photometer
- Waste Water Set-Up MD 610
- Special Distillation
- Turbidity
- Sample Preparation
- Sample Transport and Storage
- Texture
- Trace Analysis
- Water Purification
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Legionella Testing
The standard recommended Legionella test is based on a cultural method, needing up to 2 weeks for Legionella bacteria to grow and to be counted which is far too long to take action and to prevent danger. The new Legipid® test is based on a patented, immunomagnetic method, detecting only living Legionella sp. As tests develop a readable color, it is now adapted for the PrimeLab 1.0 multitest photometer.
Whilst the common cultural method needs an agar on which legionella have to grow to be counted after several days, Legipid® works differently. 1 litre of sample water is filtered to concentrate Legionella on a filter paper. Legionella on filter paper gets released in a small vial where “L1" is added. “L1" is a patented solution, containing immuno-magnetic particles (antibodies), only attaching to living Legionella sp. After several washing steps, a colouring solution is added to colour the captured Legionella. Concentration of the colour is in relation to concentration of Legionella in the sample which makes it possible to be tested by the PrimeLab 1.0. Result is displayed as cfu per litre.
Now fitted on the PrimeLab 1.0 multitest photometer, with just 1L of sample water and the patented solution "L1" you can have your Legionela test results in one hour & in-house! All you need is an update through the PrimeLab Desktop Assistant Software or the App, an activation code for ID 147 (Legionella) and a small plastic adapter to use 1ml Legionella vials. Read more about Legionella Testing with the PrimeLab 1.0.
Watch the demonstration video!
