08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Air Quality Monitor
- Breathing Protection
- Ear and Noise Protection
- Eye Protection
- Filters
- First Aid
- Furniture
- GloveBoxes and Chambers
- Gloves
- Identification of Hazards
- Laminar Flow System
- Legionella Test Kits
- Protective Clothing
- Safety Containers
- Skin Protection and Care
- Transport Trolleys
- Ventilated Storage System
- Waste Disposal
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Eye-/face wash unit PremiumLine
PremiumLine eye-/face wash unit with bowl and lid, wall mounted
- Housing, lid and bowl made of UV and impact resistant ABS plastics
- Integrated protective cover against dust
- Actuation by pulling down the lid
- Ball valve 3/8“ of stainless steel, with lever actuation by lid, DIN-DVGW tested and certificated
- Aerators made of brass with a very limited spray pattern, chrome-plated
- With integrated flow regulation valve 3/8” for setting the desired spray height and flow rate
- Inclusive sign for eye shower according to DIN EN ISO 7010 und ASR A1.3 on the lid, dimensions 170 x 170 mm, viewing distance 17 metres
- Mounting height (lower edge) 910 mm (± 200 mm)
- According to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717
- According to ANSI Z358.1-2014 and DIN EN 15154-2:2006
- DIN-DVGW tested and certificated
| Dimensions (H x W x D): | 245 x 355 x 305 mm |
| Operating pressure: | 2.5 to 5 bar |
| Flow rate: | 14-20 l/min |
| Water inlet: | 3/8” male |
| Water outlet: | 1 ½” male |