08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Analytical Systems for Environmental and Food Analysis
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Special Distillation
- Turbidity
- Accessories for turbidity meter TB 211 IR
- Accessories for Turbidity meters series TB350
- Accessories for turbidity meters Turb® 430
- Accessories for turbidity meters Turb® 550
- Accessory holders for sedimentation cones with stopcock, PVC
- Accessory holders for sedimentation cones, PVC
- Calibration Kit for Turbidimeter Eutech™ TN-100
- Coagulant injector for flocculation testers FJT-200D-6
- Cuvettes for turbidimeters, glass
- Flocculation tester ET 730 / ET 740 / ET 750, bench top
- Flocculation testers FJT-200D
- Imhoff Sedimentation cones, borosilicate glass 3.3
- Imhoff Sedimentation Cones, SAN
- Imhoff sedimentation vessels, Nalgene®, PC
- Laboratory turbidimeter TB 300 IR
- Rack for Imhoff sedimentation vessels, Nalgene®, acrylic
- Sample cuvettes for Turbidity meter Eutech™ TN-100
- Secchi Disk
- Secondary turbidity standards Gelex
- Sedimentation cone, plastic, SAN
- Sedimentation cones acc. to Imhoff, borosilicate glass 3.3
- Sedimentation cones, accessory holder
- Sedimentation cones, accessory holders
- Sedimentation cones, accessory stand, Acrylic/PP
- Sedimentation cones, borosilicate glass 3.3
- Stand for Imhoff Sedimentation cones, PP
- Stands for Imhoff cones, PMMA
- Turbidity meter Eutech™ TN-100
- Turbidity meter TB 211 IR
- Turbidity meter TB350 IR
- Turbidity meter TB350 WL
- Turbidity meters Turb® 430
- Turbidity Standards Formazine
- Turbidity Standards StablCal® Formazine
- Sample Preparation
- Sample Transport and Storage
- Texture
- Trace Analysis
- Water Purification
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Turbidity meters Turb® 430
The turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.
The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.
Scope of delivery:
Turb® 430 IR / Turb® 430 T: Turbidity meter with calibration set 0.02-10.0-100 NTU
Turb® 430 IR/SET / Turb® 430 T/SET: Turbidity meter in case with table insert, calibration set 0.02-10.0-100 NTU, PC software LSdata, accessories
| Specifications | |
| Measuring range: | NTU 0 to 1100 FNU 0 to 1100 |
| Resolution: | 0.01 in the range 0.00 to 9.99 0.1 in the range 10 to 99.90 1 in the range 100 to 1100 |
| Accuracy: | ± 0.01 NTU or ± 2 % of measured value |
| Reproducibility: | 0.01 NTU or < 0.5% vof measured value |
| Cell size: | 28 x 60 mm, 20 ml sample volume |
| Power supply: | 4 x AA batteries for approx. 3000 measurements |
Turbidity meters Turb® 430
Turbidity meters
Turbidity meters
Turbidity meters
Turbidity meters