CAP Oil Fluids

CAP Viscometer Oil Fluids are used for calibrating CAP series viscometers.

General purpose oil fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.

If you need help figuring out which standards you need for your application, check our FAQ section or contact our Sales Team.

Main Features:

- Accuracy: +/-1% of viscosity value
- Appropriate for use at shear rates greater than 500 sec-1
- Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP
- Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes

How to select a CAP Fluid?

Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.

All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz) containers.