Your basket is empty
Home > Laboratory > Viscosity > Viscometer-Rheometer Accessories > Viscosity Standards > General Standards > Brookfield Ametek Viscosity Standard Mineral Oil (Polybutene) B4900

Brookfield Ametek Viscosity Standard Mineral Oil (Polybutene) B4900
Enlarge

Brookfield Ametek Viscosity Standard Mineral Oil (Polybutene) B4900

PART NO: B-B4900

Brookfield Ametek Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz) containers.

Main Benefits
Accuracy: +/-1% of viscosity value
Appropriate for use at shear rates greater than 500 sec-1
Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP
Brookfield Ametek oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes