Benchtop-Autoclaves HMT FA/-MA and -MB series
Innovative and versatile autoclave, which combines compact and elegant design with high performance, reliability and safety
-Auto dry function: To offer the good dry result
-Microprocessor control system: Fully automatic controls from adding water to sterilisation, to drying.
-Double water level check device: One for water tank, and one for chamber water level check
-Pressure door auto-lock device
-Door close indication: All functions stopped and the door light is on, if the door isn't closed completely.
-Cycle complete indication: Auto-check each working steps condition. The *COMPLETE* indicator will light up, after correct completion of the batch.
-Low water alarm and indication: If there isn't enough water, the *LOW-WATER* indicator will light up, and alarm you.
-Pre-heating program: Pre-heating by dry heater, which not only keeps the chamber temperature in balance, but also offers the perfect dry function.
-Chamber pressure with double protection: The chamber is protected by a pressure switch and steam pressure safety valve.
-Vacuum/Pressure release key: Pushing this key, will cut-off the power supply and exhaust the chamber pressure or release the chamber vacuum, at the same time.
-Safety functions such as door lock, over heat protection, water tank level sensor, chamber water level sensor are equipped as standard
-Power supply: 230V, 50/60Hz
-Inclusive bottom plate
HMT 230FA/HMT 260FA
-Installed 8 programs and special programs for Liquid sterilisation for your selection
-Sterilisation temperature: 105 to 135°C
-HMT 230 FA-R and HMT 260 FA-R are certified according to Medical Device Directive as N-class autoclaves
HMT 230MA/260MA/300MA
-Pre-vacuum function: Offer the excellent sterilisation result.
-Dry-vacuum function: To offer the perfect dry result.
-24 Installed programs and special programs for Prion sterilisation, Liquid sterilisation, Bowie-Dick test, Pump test programs for your selection.
-Sterilisation temperature: 121 to 134°C
-HMT 230MA-R/HMT 260MA-R/HMT 300MA-R are certified according to Medical Device Directive as S-class autoclaves
HMT 260MB Klasse-B
-Pre-vacuum function: Offer the excellent sterilisation result.
-Dry-vacuum function: To offer the perfect dry result.
-10 installed programs: 5 sterilisation programs, 1 customized program for your selection, 3 test programs, drying program
-Sterilisation temperature: 105 to 135°C
-HMT 260MB is certified according to Medical Device Directive as B-class autoclaves
Product Specification:
Product Type: HMT 230 MA
Capacity: 16 Litres
Chamber diam. x depth: 230 x 410mm
Length: 594mm
Width: 522mm
Height: 410mm
Rating: 1.9 kW
|
08452 30 40 30
