ISS-3075R Refrigerated Stackable Incubator Shaker Jeio Tech AAH23532K

Temperature (°C)

     Range:  Amb. -20 (Min. +4) to +80

     Fluctuation at 37°C in Flask:  ±0.1

     Variation at 37°C in Flask:  ±0.5

Shaking System

     Motion Type:  Orbital

     Orbit Diameter (mm):  19.1

     Speed Range, unstacked (rpm):  20 to 500

     Speed Range, stacked (rpm): 20 to 250

     Accuracy:  1% of set speed (>100rpm) / ±1 (100rpm)

     Timer:  1min to 999hr 59min

     Max. Load, unstacked (Kg):  10 at 500rpm and 15 at 400rpm

     Max. Load, stacked (Kg):  15 at 250rpm

No. of Wire Shelves (std./max.): 2/8

Dimensions (mm)

     Platform; W x D:  350 x 350

     Internal; W x D x H:  440 x 440 x 418

     External; W x D x H:  578 x 815 x 854

Weight (Kg):  160

Performance

• Temperature range from ambient -20°C (Min. +4) to +80°C
• Competitive high shaking speed up to 500rpm (stackable up to 250rpm)
• Orbital shaking motion in 19.1mm diameter
• Microprocessor PID control
• Three-point temperature calibration/automatic tuning
• Wide speed range even with a heavy workload. Equipped with a maintenance-free BLDC motor to generate a smooth, quiet, uniform and yet powerful shaking motion
• Best effort run function intelligently manages its rpm to keep shaking even if the workload is out of its capacity. Automatic shaking speed adjustment in case of excessive workloads such as unbalanced load placement, unusual vibrations caused by an unstable door or external shock
• Pleasant test environment with smooth acceleration and deceleration control. Smooth start and smooth stop functions prevent chemical spills from flasks or test tubes
• High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after the door is opened
• Air-tight silicone door seal to provide excellent temperature uniformity

Convenience

• Intuitive touchscreen LCD controller with easy icons and logical menus
• Easy-set digital timer for shaking operation (1min to 999hr 59min)
• Wide sample monitoring. Clear observation of samples without affecting the inner chamber’s environment thanks to the transparent viewing window with bright LED lamps
• Repetitive tasks can be easily performed as the platform stops where it starts. Stopping the shaking platform always at the same position is highly beneficial for the automated dosing or sampling process
• Two adjustable-height shelves provided allow static incubation or refrigeration, which increases storage capacity
• Built-in electrical outlet with a safety cover inside the chamber
• Corrosion resistance stainless steel interior
• Easy-access drain system with a quick disconnect valve offers great convenience for cleaning up spills
• Built-in RS-232 port and USB port for external control and data collection
• Retractable foot caster, beneficial for easy mobility during installation or relocation (optional)
• Chambers stackable, up to two levels

Safety

• Automatic run after power interruption
• Temperature and shaking speed deviation alarm
• Over-current protection, stalled platform check
• Triple independent temperature monitor system: temperature deviation alarm (high/low), electronic temperature limiter (high/low) and mechanical over-temperature limiter (high)
• Envrionment-friendly CFC-free refrigerant
• Audible and visible open-door alarms

Specifications

1) The temperature control range of the IST-3075 and IST-4075 models are from 5°C above the ambient temperature of the equipment. (15°C to 40°C) to 80°C.

The temperature control range of the IST-3075R and IST-4075R models are from 15°C below the ambient temperature (18°C to 35°C) of the device to 80°C. (However, the lowest control temperature is 15°C)

2) Actual rpm allowable error for set rpm is ±1rpm if setting is less than 100rpm, ±1% if setting is higher than 100rpm.