08452 30 40 30
WTW TriOxmatic 700-15 201672
PART NO: X-201672
Price: £1,693.80
Out of Stock (Ships in approx. 2 weeks)
Potentiostatic D.O. sensor with integrated temperature sensor
Design according to the minimum requirements defined by ATV (Waste water association) in bulletin M 256 for meters to be used at waste water treatment plants
Potentiostatic D.O. sensor (3-electrode principle)
- To be connected to the EcoLine® or QuadroLine® series measuring transmitters
* With integrated temperature sensor and built-in preamplifier for low impedance, interference-free signal transmission
Equipped with the following features:
- Integrated lightning protection
- Sensor monitoring function (SensCheck)
- Zero current free electrode system
- Exchangeable membrane head with robust 50 um special membrane
- Lowest incident flow required
- Double thermistor system for temperature compensation
- OxiCal air calibration without accessories
Measuring range (25°C):
- 0 ... 60mg O2/l
- 0 ... 600 % saturation
Response time (t90):
- 180 seconds
Sensor length:
- 196mm
Connection cable:
- 15m long, with watertight plug (IP 65)
Type of protection:
- IP 68 (sensor)
Design according to the minimum requirements defined by ATV (Waste water association) in bulletin M 256 for meters to be used at waste water treatment plants
Potentiostatic D.O. sensor (3-electrode principle)
- To be connected to the EcoLine® or QuadroLine® series measuring transmitters
* With integrated temperature sensor and built-in preamplifier for low impedance, interference-free signal transmission
Equipped with the following features:
- Integrated lightning protection
- Sensor monitoring function (SensCheck)
- Zero current free electrode system
- Exchangeable membrane head with robust 50 um special membrane
- Lowest incident flow required
- Double thermistor system for temperature compensation
- OxiCal air calibration without accessories
Measuring range (25°C):
- 0 ... 60mg O2/l
- 0 ... 600 % saturation
Response time (t90):
- 180 seconds
Sensor length:
- 196mm
Connection cable:
- 15m long, with watertight plug (IP 65)
Type of protection:
- IP 68 (sensor)
| Analog electro-chemical D.O. sensors TriOxmatic® D.O. sensors with continuous measuring accuracy. Selction of models with an automatic self diagnosis system, a shorter response time and different cable lengths. All models are supplied with accessories box and can be connected to the monitor Oxi 298 (exception: TriOxmatic® 700). TriOxmatic® 700: For biological cleaning steps (wastewater treatment plants). With automatic self diagnosis SensReg (electrolyte consumption) and SensLeck (membrane monitoring). Medium response time of t90 < 180 s. Only available as retrofit fitting for analog converters of the Ecoline® and QuadroLine® series. Digital version still available (IQ Sensor Net System 181). TriOxmatic® 690: For measuring tasks in wastewater/water. Economic model without self diagnosis. TriOxmatic® 701: With increased resolution for the measurement of residual oxygen in the denitrification. Based on the increased resolution, a shorter response time (t90 < 30 s) and the thinner special membrane, this sensor can be used for quicker response processes with lower O2 concentrations. Scope of supply: Sensor incl. accessories box with membrane heads, electrolyte solution, cleaning solution and cathode cleaner Product Specification: TriOxmatic® 600/700 // TriOxmatic® 701 Temperature range: -5 ... 50 °C DO concentration: 0.0 ... 60.0 mg/l // 0.00 ... 20.00 mg/l DO saturation: 0 ... 600 % // 0.0 ... 60.0 mg/l / 0.0 ... 200.0 % / 0 ... 600 % Pressure resistance: 10 bar Type: TriOxmatic® 700-15 Cable: 15 m | |
| Catalogue Number | 7.008 264 |
| Manufacturer | Xylem - WTW |
| Manufacturer P/n | 201672 |
| Search words | Oxygen sensors |